EBE 65

EBE thermal break system, depth 65 mm for glass panels of up to 46 mm, rebated in the interior and flush on the exterior between sash and frame

In the EBE group, all the systems are flexible and complete, with slim, strong thermal break profiles. The thermal break profiles of the EBE 65 system have a depth of 65 mm and can house insulation glazing of up to 46 mm. sash and frame are rebated in the interior and flush-mounted externally. EBE 65 belongs to the group of EBE profiles and represents Secco Sistemi’s answer to the highest performance requirements. With the innovative technology of the thermal break in polyamide and polyurethane, EBE realizes strong and high-performing structural profiles with reduced sections. The sealing of the casings is guaranteed by a double sealing system for the doors and by an open joint gasket system that comprises a 3-level sealing gasket for windows. Moreover, thanks to the wide choice of types of opening and to the complete range of accessories, the EBE profiles propose countless possible variations for the casing design. The performance of the EBE thermal break system has been tested by the best European certifying laboratories in compliance with the current specific standard EN 14351-1 regulations.

EBE 65 Window Corner

EBE 65

EBE 65 window corner, external view in galvanised painted steel with rectangular glazing bead.

EBE 65

EBE 65 window corner, external view in galvanised painted steel with rectangular glazing bead.

EBE 65 Window

System And Performance

EBE 65

EBE 65 window is an integrated system with accessories, seals and thermal break profiles 65 or 73,5mm deep allowing for a wide range of windows, rectangular, shaped or curved. They can be equipped with insulating glass up to 46 mm thick. Each solution is equipped with a related set of accessories (also concealed) integrated in the system.

EBE 65

The sealing of the window frames is guaranteed by a three-level sealing weep system. The performance of EBE 65 thermally insulated system has been tested by the best European certifying labs under the reference standards EN 14351-1.

Size And Variations

EBE 65

lower / lateral section | frame section 85mm

EBE 65

double-sash window central section | frame section 145mm

EBE 65
Galvanised Steel
EBE 65
Stainless steel
EBE 65
Corten steel
EBE 65
Brass

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65
TT stainless steel 5056 h.135 | d.20 mm
EBE 65
TT “vitruvio medium” cut round h.116 | d.15 mm
EBE 65
TT “vitruvio medium” sphere round h.116 | l.15 mm
EBE 65
TT “vitruvio medium” cut square h.116 | d.15 mm

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65
AR standard h.85 | d.15 mm
EBE 65
AR stainless steel h.85 | d.15 mm
EBE 65
AR concealed

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65 Door

System And Performance

EBE 65

EBE 65 door is an integrated system with accessories, seals and thermal break profiles 65 mm deep allowing for a wide range of windows, rectangular, shaped or curved. They can be equipped with triple glazing up to 40 mm thick.

EBE 65

The sealing of the door frames is guaranteed by a three-side rebate double sealsystem and an automatic retractable seal. Each solution is equipped with a relatedset of accessories (also concealed) integrated in the system. The performance of EBE 65 thermally insulated system has been tested by the best European certifying labs under the reference standard EN 14351-1.

Size And Variations

EBE 65

reduced lateral section | frame section 109mm solution for butt and weld-on hinges

EBE 65

lateral section | frame section 134mm solution for three-wing and concealed hinges

EBE 65

central section | frame section 156 mm

EBE 65

normal and reduced bottom rail | frame section 69 and 94mm

EBE 65 is an interior and exterior flush door. The solution with butt or weld-on hinge has a 109 mm lateral frame section. By using three-wing or concealed hinges, the lateral face section becomes 134 mm.

EBE 65
Galvanised steel
EBE 65
Corten Steel
EBE 65
Brass
EBE 65
Stainless Steel

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65
Stainless steel 5002 h.150 | d.20 mm
EBE 65
“Vitruvio medium” cut round h.116 | d.15 mm
EBE 65
“Vitruvio medium ” sphere round h.116 | l.15 mm
EBE 65
“Vitruvio medium” cut square h.116 | d.15 mm

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65
Weld-on h.145 | d.20 mm
EBE 65
Three-wing flush h.130 | d.20 mm
EBE 65
Three-wing butt hinge h.160 | d.22,5 mm
EBE 65
Concealed

EBE 65 Is available in galvanised steel – in a wide range of colours and surface finishes – in AISI 304 brushed stainless steel, in AISI 316L polished or Scotch-Brite stainless steel, corten steel and in brass (OT67 copper alloy).

EBE 65